2006年10月23日 · I have the Dowel Max jig and can't recommend it highly enough even given the relatively high cost. The Dowel Max produces absolutely perfect-fit joints using an extremely …

2024年5月1日 · They're inexpensive and a great way to line up dowels for assemblies where dowel jigs don't necessarily work. I have sets of four sizes 1/4". 5/16". 3/8" …

2011年6月20日 · I'm working on a project, and am doing joins with dowels. Question, though ----- I bought a small dowel kit with the drill bits, dowels, and dowel centers ----- and see the centers …

2007年8月26日 · One of those "100 tips" type of books had a jig just for this. Basically it was a flat piece of wood in a squarish "C" shape. A hole was drilled through the arms of the "C" that the …

2008年1月27日 · Dowels work just fine in plywood applications provided the alignment is right and the right size dowel is used. There are some very inexpensive jigs that set up the alignment, …

For the OP's application (which I was guessing was on the carcase) I would think you could do the (hidden) spline joinery or lock-joint, do the glue up, then make a similar jig to clamp over the …

2005年10月6日 · I haven't got a good tenoning jig built yet, so my first project is using dowels at the 90 degree joints. Just tonight I put my first square subassembly together made out of 4 …

DIY Router Box Joint Jig for the BT3. Collapse. Created by: LCHIEN; Published: 02-14-2012, 11:07 PM

2008年9月10日 · Otherwise, the pieces won't be joined at exactly 90 degrees. A biscuit joiner is more forgiving in this respect. I am very intrigued by this tool, though, and I think it could be …

2017年8月26日 · Good jig, but if I'm visualizing it right, you'd have to fill those holes with several pieces of dowel stock, run it through the saw and have perhaps, some waste in the process...