2007年9月22日 · The DDC-1 (the 9W DDC, also known as the DDC-3.1), at 12V, has a maximum dead head of ~3.35m, which falls to ~2.3m at 1 GPM. These are straight from Laing Thermotech graphs. Unless Swiftech uses modified internals (I don't …

2020年1月21日 · Hello all, Just got a Laing ddc-pump 12v ddc-1t plus pwm It comes with a two pin molex and a two pin fan header for pwm functions. Is there a chance I can combine them and have the pump run on a 4 pin fan header without breaking anything?

2006年8月11日 · Basically, the inlet needs a certain amount of pressure coming in to avoid cavitation. To increase pressure, mount the pump at a low spot, and try to face the inlet upwards if possible. That being said, my system has the pump placed low, but inlet facing down. I am having no problems since the loop is small and the pump is undervolted.

2021年1月24日 · I bought a EKWB EK-XTOP DDC 3.2 PWM Elite to replace the ddc 3.1 that came with my distro pump purely out of curiosity. Well now I am trying to control the pump speed (plugged into a Aquaero 6LT) but it does nothing in aquasuite from 100 until 50%. After 50% pump speed drops from 4500rpm~ to 3500 rpm at 50% power and I can lower it from there.

2016年8月4日 · CPU blocks or AIO block-pump devices should be attached at this point or later when the motherboard is in the M1 frame. Sorry. 8. Install RAM onto the motherboard. 9. If there are daughterboards or cards with wires, such as a Wi-Fi or Bluetooth, that need routing around motherboard components or under the motherboard itself, attach those to the

2004年10月6日 · Rheostat connected in series between 12 volts and the pump - This forms a voltage divider and is a better way to go. Again, the trick is in choosing a resistance for the rheostat such that the pump doesn't go from 100% speed to completely OFF in 10 degrees rotation of the knob. On the upside, this doesn't burn excessive power.

2005年5月17日 · Last month I purchased a DDC pump from DangerDen that after two days of leak testing would not startup with I hit the power switch. I returned the pump for a refund and bought a non-rebadged version from a Laing-Delphi distributor. Yesterday I had the pump going for about 20+ hours for leak testing.

2020年12月3日 · I'm working on sourcing parts for my first water cooled build (and first custom loop). For the reservoir, I ordered the following. It's specific to the NCASE M1 and comes without a pump. IceManCooler Ncase DDC Reservoir ,Small Water Tank for Ncase M1 Cabinet V4 V5 V6,Support 8cm 9cm Fan Holes...

2020年12月10日 · I need to double check which exact pump it is, but it's a Swiftech MCP series pump with just a molex connector for power and a 3 pin to read RPM, it can't control the speed with that though. It looks like the Swiftech MCP DDC pumps pull between 1.5-2A.

2019年2月22日 · There is no 'debate', each pump serves a purpose, you need to pick the right one for the application. You will only save about half the space of the pump (DDC is 50% smaller) but the trade-offs are not worth it if that is your only concern. If its possible to use a D5, use a D5.