2018年7月17日 · In addition to cleaning your belt with a cleaning stick as rockerpult suggested, you should also take a look at the material you're sanding and the belt you're sanding with.

2015年4月22日 · It is good to use a shop vac to clean the surface between sanding grits, removing the larger grit particles from the wood before sanding with the next higher grit. While …

2021年4月3日 · So unfortunately the only effective way to deal with this is to remove the affected wood; file, scrape or sand until you've gone deep enough that the stains are gone. When …

I didn't sand down to plain colored wood, but just enough to remove the surface imperfections and cup stains, etc. Should I use wood conditioner on it? It is unclear to me as to whether wood …

2019年8月25日 · Do I need to sand off old finish completely before applying polyurethane? Generally speaking no, you don't need to completely remove previous finish to apply more of …

2016年5月26日 · Generally smooth (sanded or scraped) wood surfaces are encouraged. Once the glue is place and covering both surfaces apply pressure, with clamps where possible. You …

2015年3月17日 · Use your stain remover again, but this time be more specific and use an (old) toothbrush to apply it and 'clean' it back off when it is time. A toothbrush can can work the …

2022年2月4日 · Re-sand surface with a clean sanding pad, wipe with mineral spirits and wait for it to dry, then pre stain if you think you’ll have absorption problems, wait 30-40 minutes, stain. If …

2015年3月31日 · The reasons you may need to sand between coats are to "de nib", that is to take off dust specs and knock the tops off any bubbles in the finish. You can also sand to take care …

2017年4月13日 · The main thing is to physically clean residue 1 from the surface by washing, the bacteria in the traces that remain (and there will be some) appear to be made inactive when …