2016年7月30日 · Everything worked without having a dealer activate the software. The lights are controlled using the Nyon display.I ordered the lights and Bosch cables from Bike-Discount.de installation was straight forward although I had to drop the motor to route the cables through the frame. It was no more difficult than the video in the earlier post.

2017年4月12日 · I've been looking at different light systems to install on my Bosch CX system, but I am having a hard time figuring out if there's any available which is plug n play, where you dont need to cut into the wire harness of the motor. Does anyone know if such a system exist?

2016年10月10日 · Any of the Bosch dealers in your area should be able to order the wiring harness for you. For all of you with a Felt electric bike mine is the nine-e 20 they come with the front light already pre-wired. You can find it in the wiring coming out of the top of the frame. You will have to buy the Bosch rear harness if you are going to use back lights.

2023年9月29日 · Chris runs an electric bike shop, so most of the models we looked at had the option to wire-in some lights to run off of the ebike battery. Some of these lights would work just fine on their own, being powered by independent rechargeable cells. Many electric bikes come with lights already wired in. I hope this guide helps you understand why ...

2018年2月2日 · Following a ride yesterday (which utilised 50% charge), I was putting gear away when I noticed my Bosch 500wh indicator lights were flashing. The first three bars would illuminate for about 2seconds, then go out for 8seconds, and repeat ad infinitum. Pressing the indicator button did nothing. Putting it on charge did nothing.

2022年7月12日 · A brief visit to any Bosch certified bike shop, they hook it up to their diagnostic system, check one box, now your on off switch works..out the door in 15 minutes How about asking around here or even better at the shop where you bought the bike first before jumping to uninformed conclusions.

2018年11月24日 · Bosch!! I have found that the + and - buttons can be inconsistent to press because they angle in to the right (towards the LCD screen) vs. going straight in and out like the button pad that comes with the Bosch Intuvia and Bosch Nyon. Navigation timestamps: How to change units (miles to kilometers) at 1:57; How to activate lights at 2:04

2019年2月3日 · How to activate ebike lights at 0:40; How to activate walk mode at 2:34; How to enter the settings menu at 4:57; How to remove the display at 9:04; How to use the Micro-USB charging port at 9:04; One note about the color LCD display unit, there is a coin cell lithium-ion battery inside that may eventually expire and need replacement.

2021年3月27日 · Bosch does not charge for this assistance, but it is wise to ask your shop what they charge for their shop service time. A few more things you can try at home: - Attempt to turn the eBike on using the power button on the Powerpack, not the Purion. - Remove Powerpack from eBike, then press+hold Powerpack power button for 15 seconds (BMS reset.)

2020年12月2日 · Most Bosch Gen2 drive units have the option for 6v or 12v, with selection being made by an IBD using the Bosch Diagnostic Tool. All Gen3 and Gen4 are 12v only. Current draw is 1500mA continuous/1800mA MAX for Gen2, and 1500mA continuous for Gen3/4. (1100mA front, 400mA rear) I took a look at the Lupine website via the link you provided.