2011年10月27日 · The type of rust converter I use does not need any water directions say apply 2 coats letting it dry for 1/2 hr then paint with a good oil base paint, Nice black coat just apply and let dry Save Share

2010年2月11日 · The rust "converter" stuff I've seen (and tried) is pretty interesting but is pretty much a band-aid. It stops the rust, for a while, and does a pretty good job of covering it up. Also for a while. Sooner or later the rust alway seems to come back through the "converted" area. Or did when I tried it anyway.

2004年6月4日 · go to www.tinmantech.com.---picklex 20 works great it kills rust in its tracks.$100 a gallon.the tinman sells a product that does the same thing for $28.00 a gallon. theres also rust mort but i don't know much about it.zero rust has a good reputation.por 15 i've heard peels off and if rust is still active underneath things could rot out before ...

2014年2月23日 · The wirebrush grinder is the quit the best tool where you can have acess, but you still have to stop the rust action that's what C.L.R do and rust remover don't. I was septic the 1st and 2nd time i did this process but not rust never showed up.

2008年7月13日 · I sandbalsted the cab of my 50 chevy and primed it with SPI epoxy, my goal was to get all the rust off and have a good base to start. now after 6 months of sitting inside my shop I looked at it and rust is showing in a few areas. the truck was blasted to …

2022年9月24日 · That converts the rust into a hard substance called iron tannite, which is a hard black or dark brown substance that is sandable, paintable and usable as a "primer" layer for painting. The advantage to the stuff is that it's non-toxic (it's a naturally occurring anti-oxidant substance found in tea and red wines), so you don't need any ...

2015年10月10日 · Product Removal: Fast Etch & Ospho - 1 minute wire cup (left side); 1 minute 3M rust/paint stripper (right side). Gel - wipe excess gel with rag then 15 seconds 3M rust/paint stripper Conclusion: 3rd place: Fast Etch. Removed the least rust 2nd place: Ospho. Pros: Costs slightly less than Gel. Removed as much rust as Gel.

2014年5月4日 · Tech Help. Body - Exterior. 53 Belair conv rust repair

2005年8月4日 · I am doing the underside of my 1988 mercury cougar, it is in very good shape, just has surface rust. this is what i am doing, I am working in a small garage and have no compressor. I am taking a while wheel to it first, then going to sand best i can, the use a rust converter then undercoat and...

2006年1月19日 · I sanded the area with 40 grit with a power sander/grinder, wire wheeled the rust as best possible and applied Metal Ready and two coats of the POR black. THe car sat under a tarp for 3 years.....a humid climate so lots of moisture.