2020年12月2日 · Like the original R80 G/S, the R100 GS had a boxer twin engine, with two-valve heads, shaft drive and five-speed gearbox, derived from the era’s street bike engines. The GS …

2006年1月21日 · I have a '77-8 R100. I have an 85 R80. I also have a newly acquired 91 R100. The 77 R100 is the roughest ... but it's still very smooth by most standards. The 85 is pure …

2008年7月9日 · I recently purchased a 1978 bmw r100/7, one bing cleaned up good but the other was trashed. I purchased from ebay 34 mm mikuni carbs. I believe that these are …

2014年12月29日 · I found my bike and bought it. 1977 BMW R100/7. And its first night, it needed to be left at the shop. It's had a tendency to stall unless revved up. That's what partly brought a …

2017年4月7日 · Nice work on the refurb. It's good to see that you have the front fender sorted. In 1988 BMW had an idea that didn't work great: one fender and two fork braces to allow the …

2018年11月9日 · Certainly 5% over is more tolerable than the 15-20% overages that I see on the R100/7. Can't get final drive #s at the moment, won't get back to the bike for a few weeks, but …

2015年10月25日 · I have an old BMW R100 RS (1980) which I am going to convert in to at café racer during the Danish winter. I have two major concerns (so far) which I would like some …

2003年7月7日 · My first BMW was/is a 1981 R100RS. I can't get rid of it even though it's been apart for years. I love the RS. The cast wheels that were recalled don't have a ridge on the …

2008年11月5日 · I have a relatively stock 78' BMW R100/7 with a dual front disk, ATE style brakes and an under tank master cylinder. I also have a set of 84' R100RT dual disk Brembo …

2022年8月24日 · To get a “complete” set of rings for the Krauser 4-Valve pistons, I needed to combine two different ring sets. The top compression ring is a good bit thinner than a stock …