Audiopipe is a global manufacturer and distributor of 12-volt electronics, pro- audio equipment, marine audio equipment, and electronic audio/video accessories.

All applicable portions should be considered in pipe sizing and design of the tempered water system. It should apply to auxiliary piping , connecting the equipment of the system and the piping between the system and the consuming units.

2018年11月7日 · Pipeline valves almost always have some form of auxiliary connection. These can be emergency seat lubrication ports or drain lines. For valves installed above ground, simple check valves or injection-type fittings are threaded directly into the valve body. For buried valves, welded pipe connections are usually employed.

Instrument and machinery piping, typically small-bore secondary process piping that can be isolated from primary piping systems but is normally not isolated. Examples include flush lines, seal oil lines, analyzer lines, balance lines, buffer gas lines, drains, and vents.

pipe被归类为管状容器，通常用于输送气体或液体。 它们由“标称管道尺寸”（NPS）和Schedule（壁厚）规定。 NPS是美国国家标准协会（ANSI）制定的尺寸标准，不要与各种螺纹标准（如NPT和NPSC）混淆：

首要步骤，确定音响是否配备aux输入端口；接着备好一条具备同等端口的aux接线即可。 将AUX线插入音响相应接口以及手机耳机孔后，适度调整音量便可完成设备间的连接。

Always comfortable and effective cooling – even in large rooms. Thanks to the extremely flat design, the AUX duct units are perfect for rooms with limited installation space. The small height of the casing - only 245 mm - makes it possible to install the unit even in low ceiling spaces.

The design of this part is tailored to match your equipment according to the specifications provided by the manufacturer. If any alterations are made, it may lead to the product being incompatible with your equipment.

2016年6月22日 · Aux Fuel Tank - What to Do with Vent Hose? I recently acquired a 2014 RAM 3500 DRW 6.7 Cummings (my first!) and I'm in the process of adding a used auxiliary 50 gal fuel tank/tool box combo. The tank came with three hose connections: (1) Supply, (2) Return, and (3) Vent. I'll be placing fuel filters (10/2 micron) and a pump in the configuration.

Auxilliary hydraulics are often required when operating implements fitted with hydraulic cylinders. The most basic hydraulic take off is for single acting cylinders which feed and return through a single hydraulic hose. Examples of this are tipper trailers & bucket loaders. Remove this plug & fit a single hydraulic hose with female coupling.