2007年1月9日 · The simple answer is: not really. The 1jzgte is a much different engine compared to a 7mge or even a 7mgte. Think about it: the 7m revs to about 6000rpm (give or take) and has a single low pressure turbo (factory 6-7psi). The 1jzgte revs to over 7000rpm and has twin turbos that go to 13psi (give or take).

All Parts and services offered by CXRACING are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/.

2009年4月4日 · Upgrading to a 3.0 V-6 3-core ( 2" thick) radiator is a good option; it will bolt in the same as the 4 cyl. rad. Or upgrade to a capable aluminum radiator. Most likely it will be necessary to trim, modify or remove the core support to fit the radiator in and this usually mean that you will lose your hood latch.

2024年8月23日 · Excellent price and parts quality, great communication and fast shipping! A++++++ seller! Thanks! Also included is a 1.1 BAR radiator cap. If its not properly installed, might cause the motor to over heat due to low coolant or air pockets in the cooling system. FIT: TOYOTA SURPA 86-92 MANUAL MODEL.

Driftmotion is your one-stop shop for building a high performance 1JZ, 2JZ, 7M, or UZ powered monster! Drifting, Solo2 Racing, Land Speed Cars, Fast Street Cars, Time Attack, Rally Racing, Off-Road Racing, we love it all!!! We have high quality parts at super competitive prices!

Shop wholesale-priced OEM Toyota Supra Radiator Supports at ToyotaPartsDeal.com. All fit 1986-1998 Toyota Supra and more.

2011年10月21日 · "the 5th gen has a tested and proven bottom end. the 5mg responds extremely well to the 2900cc or 3100cc engine kit. it said in the 2900cc form the supra will out accelerate mustangs and camaros and actually outrace them on the straights. it says basic block prep is all that is needed the head gaskets can cause serious wear on the block surface ...

2006年6月27日 · It would appear to me that the simplist way to hook up a 7M to an R series tranny is to use the bellhousing from the R154 Supra Turbo and swap in a Jeep AX15 input shaft into a 96 and earlier R150F. Problem? Calibre - nice videos. You said your boosten to 15? I hit fuel cut off at 14psi a few times tryin to max it out.

2007年7月20日 · Ok searched but none of them were straight forward enough. 1. Is the radiator form a 7mge any different from a 7mgte? If so will a 7mge rad work? also...

2013年5月19日 · so on Friday i took my Crown (7MGE) a hour out of town, i was hitting 160kmh going there and it rode absolutely fine. when i stopped, i thought i faintly smelled coolant but it thought whatever its just the heat. came home Saturday, poked around the engine bay, and the coolant reservoir was empty. checked the rad, it was down about half a liter ...