2020年5月20日 · I need some serious and fast help. My girl is in the shop now. They cannot get it started. She is a 1977 CJ5 4.2L 258. It is almost all original until the ignition issue. it has all …

2015年3月13日 · Topic for today: Replacing the steering shaft Lower CouplingKit and steering column Lower Bearing Set on the CJ models. At some point, especially on a Jeep that is 25 …

2004年5月1日 · I have just received (long story) a 1973 Cj5 “Super Jeep†(limited production in ’73 with some special mods). It was garage kept for 25 years and looks like it came right …

2012年11月3日 · As you all probably know, Jeep parts are expensive. I am working on getting a '77 CJ5 moving again and was wondering if anybody knew of any seats out of a different …

2020年10月22日 · I've recently acquired a stock '74 CJ5 project jeep, and have the opportunity to pick up a stock '77 CJ5 for parts. The '74 will be kept relatively stock for farm use as well as …

2009年8月22日 · ok so newbie here, so bare with me, im just hoping to get some input..... i have a 77 cj5 with the 4.2 all stock and a 81 cj7, same motor nearly stock also. but i was thinkin about …

2009年9月1日 · Hello, i could use some advice. I have a 77 cj5 with a amc 232. I used to own a 65 amc rambler with the same motor infact i have enough parts to build about...

2013年6月26日 · At a glance, you are correct about the carb. port going to the cansiter. The nipple on the CTO valve marked "distr. vac" gets tee'd into the ported (not full) vac line, which …

I bought a 1974 CJ5 project jeep a while back, and subsequently acquired a 1977 CJ5 parts jeep. The ‘74 was in pretty decent condition, but had a lot of hacks made to it over the years. I’ve …

2014年2月9日 · correct, No 5 came factory with a auto. It is done by owners but is difficult to do because of the short wheel base and the length of the auto trany makes a workable rear drive …