2021年8月15日 · After the swap, the 22RE sending unit was a direct fit/replacement on the 3RZ and seems to work just fine. I am still getting a weird check engine light code, despite having …

2014年2月4日 · Get the 3RZ on the stand, check the bearings, see if I can hook up a starter and check the compression. If I can verify good bearings and good compression, I won't tear this …

2004年7月9日 · its a pretty direct swap. just make sure that whatever 3rz you buy is the same year as the 2rz you have, and you'll need a 3rz ecu. if you keep the years of the engines the …

2010年2月12日 · I didn't bother posting the suspension build cause it is the same old chevys in the rear and RUF, but I am going to try to post my 3RZ swap build on here. My 83 started …

2006年5月21日 · The donor 3rz motor came out of a 2000 Taco 4wd that I picked up at auction for $2300. Was able to get this one for so cheap because it had just the right amount of damage: …

2007年4月16日 · Over the next couple of weekends I will be swapping in a 3RZ into my 86 4Runner. I have already read up (quite thouroughly) on swaps done by 4RnrRick, BigMike, …

2007年8月11日 · There are two basic manual tranny options for a 3RZ swap -- use a 3RZ with the bell that came with it to go to a W series trans (either the W59 that comes with it or a W56 …

2008年12月8日 · I am swapping a '98 3RZ into an '84 22R truck. Doing external Walbro fuel pump, I have the engine harness that goes into the driver side firewall & ECU. I do not have …

2009年3月4日 · Your work is first rate, and I while I wrote off the tach issue, if someone happens to stumble on a way to get the V6 tach to read more accurately with a 2/3RZ swap then I am …

2006年12月29日 · If you swap only the engine (using a 3RZ) and try to bolt it to a 2RZ tranny, you might encounter few problems. I believe the bellhousing is slightly different too (I remember …