2021年11月10日 · The .338 RUM is a .300 RUM case with a slightly shortened OAL….. The Edge is done on a full length .300 RUM case

2011年8月29日 · With the longer barrels used for the 338 Edge we started running heavier bullets specifically the .338 Sierra 300 gr. SMK. We can run the 300 SMK .338 bullet 2800-2950 fps depending on the load and individual rifle. Our initial push was to develop a 338 Edge bullet rifle combo that would penetrate 3/8" mild steel @ 1000 yards with extreme accuracy.

2010年7月8日 · Re: 338 Lapua vs 338 Edge??? What are the pos and neg Since you are already shooting a 300 Ultra, the 338 Edge would be the easiest way to go. Install a Wyatt's mag box or Seekins Detachable mag, and a 338 Edge barrel. Done deal. All of the 30" Edge's that I have built run 2870-2920 with the 300 SMK.

2018年3月2日 · Well I kicked it around long enough and I'm finally having a std. 338 edge built. Just curious on reloading insight from experienced edge guys out there. Here are the list of details going into the build. Trued Rem 700 action 28" proof 1:9.4 Terminator T3 brake Std. Rem sendero stock… (Bell and Carlson I believe) Trigger tech trigger 4" Wyatt ...

2011年8月27日 · The 338 Edge +P is not a modification to the case design at all, the case remains the same as the standard 338 Edge. The patented +P modification is a throat design that lowers peak chamber pressure allowing more powder to be burned (6-8 grains) giving an additional 150-175 fps.

2007年3月29日 · 338 edge load info Remember stupid will hurt, please use safe reloading practices and work up to accurate loads within standard pressures. Test rifle 30” Hart barrel, 1-10 twist, throat +.050”

2004年11月18日 · Got my new 338 edge from defensive edge gunsmithing last week. Went to the range with shawn and the frist 3 round out of gun shot a half inch. at a 100 yds. Cleaned it and shot .327 inch group at 300 yds Played at 300 yds 2 or 3 more groups all vary good under inch. Time for the long range...

2021年7月29日 · I had a 338 Edge, using the +P chamber, it was accurate, but not fast enough for me even with a 30" barrel. I built my own rifle and designed my own cartridge using a 4" mag (modified) using a CZ550 Safari Magnum action. 2 cartridges were initially designed and reamers made, 338-416 Rigby Improved 45° with .010" taper per inch and a neck .050" longer than calibre.

2010年10月25日 · I'm loading for a 338 Edge. Looking for recipes some of you have had good results with. I'm using RP 300 RUM brass necked up. I have both Retumbo and H1000 powder. My bullets are 300 grain Bergers and Cutting Edge 265 grain Lazers. Any info on associated seating depth and velocities is...

2011年11月15日 · Currently I have a Stiller Tac 338 action (Laupa bolt face) and a Stainless Remington 700 with a PTG bolt with a mag face. The barrel I have is a Proof Research that will finish at 28". I, for the longest time, wanted to build a 338 edge but now I am torn. The more research I do on the...