2020年5月28日 · This is a 20mm EDF unit using a 0703 outrunner and clipped 4 blade quad prop. I'll start with a profile jet and get it airborne and go from there. My plan is to have have an indoor jet without too much speed and then go for an outdoor iteration.

2020年12月10日 · The model has an 7.5" span, 28 gram AUW with the 180mah 2S lipo, motor puts out around 26g thrust, two linear servos for the elevons, a Sunrise high frequency switching ESC, and a 6 channel 2.4ghz receiver. All balsa for the construction.

2016年4月13日 · The unknown factor is the efflux. Try mounting the EDF in a simple profile test bird. You may be surprised.

NitroCharged 20mm EDF: • 20mm EDF Pocket Rocket! DH108 Swallow...

Maiden flight: https://www.youtube.com/watch?v=NYMgAJMpp7oGo check out NitroCharged for other awesome micro EDF projects:https://www.youtube.com/c/NitroChar...

2023年10月24日 · I've seen a few 20mm EDFs in the forum. They're all 3D printed fans, not cut down props. You want thrust but not speed for this kind of model (I'm assuming you're not going for speed, maybe that's wrong).

The two halves hold the EDF unit like a glove (only placed together in this image).

Here is my build log for the DH 108 Swallow from Steve Bage's jetex plans that I am modifying into an R/C 20mm EDF fan set up. I did start this a long time...

2021年7月30日 · 15" wingspan, all balsa, two 1.5 gram linear servos, banggood RX, 20mm brushless EDF courtesy of Nitrocharged, Sunrise ESC. Will run 2s first just to make sure she actually works, then may tempt fate by trying 3s (or maybe not...we'll see).

2019年1月30日 · This is a 20mm EDF fan made using a 3D printed housing, 0703 brushless outrunner and a clipped 3 blade propeller. Specs for the Tevo Michelangelo 3D printed ...