2023年1月12日 · I only have two choices: buy a new iPhone to replace my top of the line phone that's just over 2 years old (so I can toggle the Hotspot compatibility switch that was introduced on the iPhone 12, which forces the phone to operate on 2.4 ghz), or upgrade to the 960 Orbi (the upgrade cost alone is more than I spent for the system I have, but other ...

2020年8月3日 · There are a couple of reasons 2.4 GHz is usually slower than 5 GHz. First, 2.4 is (mostly) limited to 20 MHz wide channels, while 5 GHz can often utilize 40, 80, or 160 MHz wide channels. Second, there is a lot of 'stuff' on 2.4 - other Wi-Fi users, Bluetooth, Zigby, analog CCTV, microwave ovens, some motion detectors, lots of stuff.

2020年1月9日 · Beware that some of the older dual band routers (like 7+ years old) could do 2.4 GHz or 5 GHz WiFi, but not at the same time. You had to pick one or the other. The ones which could do both at the same time were labeled "simultaneous dual band." Newer routers should be safe, and all capable of using both bands simultaneously.

2020年6月7日 · I tried to force windows to use 2.4GHz through the Device Manager, but it keeps using 5GHz instead. Also, there doesn't seem to be any such setting on the router's settings, it always transmits on both 2.4 and 5 GHz. Is there any way to force Windows to use 2.4 GHz outside of that setting in Device Manager?

2021年2月22日 · In summary, you can dial in static client associations to the appropriate band depending on what your endgame is (performance vs range), but if you designed your WiFi environment well like choosing the correct channel width, the use of non-overlapping channels, and avoiding high-interference channels, using the same SSID for 2.4 and 5 GHz ...

2021年2月13日 · I purchased this router / modem 2 months ago. W set up the 2.4 Ghz and 5G connections and used both. A few days ago the 2.4 Ghz disappeared from our devices. 5 G still shows up throughout the house but we can't connect to the nighthawk app unless down in the room with the router. The router hasn't m...

2020年11月21日 · The majority of issues are caused by "smart" devices App requiring a forced connection on 2.4 GHz (something virtually no wireless client can do), and by poor IoT wireless client implementations struggling about extended standard data like AX mode bits or RRM (radio resource management) bits in use for informing capable clients of neighboring ...

2020年6月21日 · Inform the smart plug vendor that any wireless radio - regardless of the frequency (2.4 GHz, 5 GHz, 6 GHz, 60 GHz and even all Ethernet switch ports connect to the very same network. Let them know there is no reason for checking the phone is connecting using the 2.4 GHz band in their App.

2015年12月23日 · The crazy thing is that you can connect to the 2.4 GHz guest network just fine. It's the 2.4 GHz regular private network which suffers the connection drops. The Merlin firmware doesn't fix it (didn't expect it to since it doesn't update the radio). The only thing I didn't try was installing a 3rd party firmware like DD-WRT.

2020年11月21日 · The single SSID and security key does work on both the 2.4 GHz and the 5 GHz band, a 2.4 GHz only client configured to these settings will connect to 2.4 GHz - except if the wireless clients struggle with the additional bits in place on a Mesh system. In that case again, only the IoJ maker can help.