Kits include: Front Cross Member, Transmission Cross Member, Drive Shaft, Motor Mounts, Motor Mount Brackets, and Shifter Extension. All parts are CNC Laser Cut. *Add $210.00 for Aluminum Drive Shaft *Add $150 for 6-speed Getrag transmission *Shifter Housing and Steel Linkage required for core* *Special Order Item* Item #: FC-001

2023年10月26日 · RX-7 1JZ and 2JZ Swap Kits Another JDM swap worth considering is Toyota’s JZ engine. You may choose between the 1JZ or 2JZ , but the more cost-effective way would be the 1JZ.

2010年9月22日 · * join RX7 charging and starting harness to 1jz motor * Separate cruise and window wiper harness from rx7 harness and run it * modify heater core outlet and inlet to fit

2019年7月18日 · Hope this video gave you a little bit of knowledge of the parts you are going to need to do a 1jz swap into your rx7. If you were wondering I love the swap a...

2005年3月2日 · Considering a 1jz swap on my rx7. eddierotary on Dec 23, 2017. Dec 26, 2017 02:07 PM by Natey. 3. 8,116 2jz into fc. Appa on Nov 19, 2017. Nov 19, 2017 11:13 AM by Appa. 0. 5,411 93 2jzgte FD Cooling. canthony92 on Feb 14, 2017. Nov 13, 2017 06:03 PM by 4rcedfed2jz. 5. 2,776 1jz vvti weight vs 13btt. Sketch_hs on Feb 18, 2017.

2015年5月24日 · I swapped my fc a few years ago to a twin turbo 1jz and went single later. You will need to get a transmission shifter extension for the r154. If you have any questions I can do my best to help you out or point you in the right direction for information.

This Wiring Specialties PRO Series harness was designed specifically for a USDM LHD Mazda FD RX7 (93-95) with the 1JZGTE non-VVTi engine swap. It was developed in house on an actual 1JZGTE non-VVTi engine to ensure a perfect fit to all engine connections.

CXRACING Turbo DownPipe For Mazda RX7 RX-7 FC, 13B Engine with Single Upgrade Turbo .. Item Code: DP-FC-V-TRB-VCLM-300 $245.00

2010年10月1日 · I put a 1jz into my 88 rx-7 and even with the engine as far back and as low as I could put it, the hood barely clears (I had to cut some of the bracing). The 2jz is about 3" taller, and in my opinion you don't have a hope in hell of fitting one under the stock hood unless you want to make a different front subframe.

We've made these brackets to try and fit the JZ as best we can to give a bit of adjustability, sit as low as possible and work with a factory Toyota rear sump pan (like SC300). Unfortunately the motor still doesn't sit quite low enough, hoods don't tend to close without some modifications or spacing of the cross member.