2018年1月11日 · I have them in dba4000's for 04-07 sti f/r brembos on my05sedan and my swapped/build 04 forester, also a set for my11hatch. Part numbers ending in -10. Last edited by rexworx; 01-08-2018 at 11:12 AM .

2007年2月26日 · 07 USDM Sti 6 speed: into wrx-transmission-driveshaft-6 speed shifter and assembly****-6-speed clutch fork and slave cylinder for 2007 sti R160 rear diff (02-05 wrx) 6 speed clutch and flywheel Circlips from 2004 sti, oil seals and axle stubs 1st: 3.636 2nd: 2.375 3rd: 1.521 4th:1.137 5th:0.971 6th: 0.756 reverse - 3.545 final drive ratio - 3.90

2016年4月21日 · Air Pump removal for 07 STI Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo)

2009年2月17日 · 07 STI Transmission difference Transmission (AT/MT) & Driveline. I want to order a 07 STI Transmission for my wrx from my local dealership, He asked me for a vin that I can give him from ebay but I was reading that the gearing from the early production STI wasnt the longer gearing but the shorter from the 04-06.

2012年11月3日 · News on '07 STi? spooledwrx: News & Rumors: 18: 02-09-2005 02:56 AM: All times are GMT -4. The time now is ...

2007年7月2日 · 93-07 Imprezas with rear discs (except sti, 06-07 wrx) 98-08 Foresters with rear discs 274x10mm (old) There are two versions of this rotor. One old, one new. The onld version went on 05-09 Legacy/Outbacks, with a 170mm parking brake. The exception is the LGT and 3.0R, which got 290x18mm vented rotors. Applications:

2018年12月6日 · BugI w/ 07 STi Swap www.TriStateTuners.com It was wiring on the drivers side frame rail, I believe it got pinched by my aftermarket coolant reservoir tank / battery or something in that area.

2016年10月1日 · STi rear knuckles and bearing: same parts for all of the last few versions of STi's (not sure about 08), I know a few foreign folks with older STi's that are running 5x114.3 rear hubs. So all rear STi bearings are the same strength. Front hub axle engagement: WRX, Legacy, Forester front axles can be used with STi hubs, pre or post 05.

2009年9月11日 · The 07 STI's heads flow very well and have better coolant passages then the previous years hense the reason for Subaru eliminating the need for sodium filled exhaust valves. The stock factory map is the problem. borrowed these pictures first picture 07 STI heads second picture 04-06 STI heads

2009年7月10日 · So the car is an 07 sti, stock for 9k, modded with a tbe for about 200miles. Prior to the tune, we had an ewg setup put on, however didn't hook up the vaccum lines or bracket to hold the iwg shut due to the 07's being notorious for problems.