Press the SikaSwell® profile firmly into the fresh ap-plied SikaSwell® S-2. Place the SikaSwell® profile within a maximum of 30 minutes (+23 °C / 50 % r.h.). 2. Ensure full and continuous contact between the SikaSwell® S-2 and both the SikaSwell® profile and the substrate is achieved. 3. Allow SikaSwell® S-2 to harden minimum 12 hours

SikaSwell® P Profiles February 2020, Version 01.01 020703300100000001 PRODUCT DATA SHEET SikaSwell® P Profiles SWELLABLE JOINT SEALING PROFILES DESCRIPTION Sealing profiles which swell in contact with water to seal all types of joints and penetrations in concrete. USES To seal: Construction joints Pipe and steel work penetrations through ...

SikaSwell®-P Profiles SikaSwell ... 2507 H . 25 : 7 . Dual swellable profile with pressure relief chambers . Other profiles are available to order on request. Storage . Storage Conditions / Shelf Life . 48 months from date of production if stored in unopened, undamaged and sealed

made between the SikaSwell® P Profiles and the SikaSwell S-2 coated substrate. Important: The SikaSwell® P Profiles profiles require a reinforced concrete / concrete cover of at least 8 cm. Important: Minimum cover to profiles on both sides must be 10 cm (reinforced concrete) or 15 cm (non re-inforced concrete). SikaSwell® S-2 Sealant ...

SikaSwell® swellable profiles and sealants are an interna-tionally tested and proven range of extremely cost effective hydrophilic joint sealing systems which swell in contact with water. SikaSwell® profiles are easily bonded to joints and penetra- tions in concrete with Sika® adhesives, normally with no effect on reinforcement and formwork.

During concreting, compact well around SikaSwell® P Profiles profiles to provide a dense concrete without any honeycombing or voids. Surfaces which are excessively rough can be susceptible to leaking.

SikaSwell®-P Type 2507 H Revision Date: 08.03.2023 Date of last issue: - Version 1.0 Print Date 10.03.2023 Country PL 000000039247 2 / 11 SECTION 4: First aid measures 4.1 Description of first aid measures General advice : No hazards which require special first aid measures. If inhaled : Move to fresh air. In case of skin contact

SikaSwell®-P Profiles can be fixed with SikaSwell® S-2 and/or Sika® Trocal Adhesive C-705 depending on substrate type and condition. Smooth, flat, dry substrates such as PVC, metals, precast concrete elements etc.

SikaSwell® systems are ideal for sealing construction joints in basements and other below ground structures with a low to medium ground water pressure. They can be applied as the primary sealing solution, or in combination with other waterproofing systems to provide additional security.

SikaSwell-P Profiles are swellable joint sealing profiles used to seal construction joints and pipe/steel penetrations through walls/floors. They are easy to apply, swell in contact with water, and provide a water resistant seal without requiring hardening time or welding.