2013年8月14日 · .kpxe is a PXE image that keeps UNDI loaded and unloads PXE.kkpxe is a PXE image that keeps PXE+UNDI loaded and return to PXE (instead of int 18h). From here; And there is also .kkkpxe - "The ipxelinux.0 build process should therefore now use undionly.kkkpxe instead of undionly.kkpxe."

2016年7月12日 · undionly.kpxe will unload the PXE base code and leave the UNDI driver present. undionly.kkpxe will not unload the PXE base code. It can be used to work around buggy BIOSes where INT 18 is broken and the only way for iPXE to exit is to return to the PXE base code.

2020年5月13日 · Why are you using undionly.kkpxe ? it might cause you some grief and you might want to use undionly.kpxe instead. You will want to have a bootx64.efi (ipxe.efi) that you load when arch is efi, For the windows DHCP it is some poorly documented magic somewhere that you need to change.

So which one supports the most hardware? ipxe or undionly? pxe or kpxe? Also i need to support 32bit Legacy, 32bit EFI, 64bit EFI and maybe 64bit Legacy. Am I correct in assuming the following options support the most hardware?

2019年12月12日 · Host has mallnox connect x3 network card. It does have ipxe but I am trying to test if undionly.kpxe could be our solution to cover both legacy and newer network cards. I think the problem is that I have separate dhcp and pxe servers. So when it boots into undionly.kpxe then my dhcp sever responds to Discovery request along with pxe server.

2019年8月19日 · So, what is the fastest way for booting itself and booting images, is to use ipxe.pxe or undionly.kpxe ? I built ipxe by myself. And there is one nasty thing. If I use ipxe.pxe, booting hans up after Features banner and Ctrl+B request, there is no even net configuration process shown. If I use undionly.kpxe from the same compiled version, all ...

2015年1月22日 · But I want to add "console" and "colours" commands to it. So I downloaded the source via git and built my own undionly.kpxe. With my build, I can download an initrd and a kernel, but when I boot the kernel, it can't find the initrd. I've been careful to change nothing in my setup other than undionly.kpxe. I can only assume I'm building it wrong.

2013年7月27日 · .kpxe is a PXE image that keeps UNDI loaded and unloads PXE.kkpxe is a PXE image that keeps PXE+UNDI loaded and return to PXE (instead of int 18h). From here; And there is also .kkkpxe - "The ipxelinux.0 build process should therefore now use undionly.kkkpxe instead of undionly.kkpxe."

2016年12月3日 · Hello, I am attempting to gain access to iSCSI target and no success as of this moment and I am confused why it does not "attach" my target.

2017年1月12日 · so what you would probably like to do is to always boot ipxes undionly.kpxe in legacy/pcbios mode, and in efi mode chain into the wds.efi Even if you can detect EFI or not as a base with the above mentioned arch option, there is no option or detection AFAIK in dhcp for if secure boot is enabled or not.