JFFS2 notice: (1142) jffs2_get_inode_nodes: Node header CRC failed at 0x0a3fa0. {0000,0000,48000000,85fda645} JFFS2 warning: (1142) jffs2_do_read_inode_internal: no data nodes found for ino #790 JFFS2 notice: (1142) jffs2_do_read_inode_internal: but it has children so we fak e some modes for it device eth0 left promiscuous mode

2014年11月16日 · JFFS2 notice: (1146) jffs2_get_inode_nodes: Wrong magic bitmask 0x0000 in node header at 0x0caf5c. Node totlen on flash (0x00000000) != totlen from node ref (0x0000004c) JFFS2 warning: (1146) jffs2_do_read_inode_internal: no data nodes found for ino #81. JFFS2 notice: (1151) jffs2_get_inode_nodes: Wrong magic bitmask 0x0000 in node header at ...

2016年10月28日 · JFFS2 warning: (1016) jffs2_do_read_inode_internal: no data nodes found for ino #9334 Also I checked in U-boot if exist any bad blocks and it doesn't. I was researching how a Nand flash works and I found that it has an Out-of-Band (OOB) area that contains an Error-Correcting-Code (ECC) algorithm.

2010年12月15日 · I have device with JFFS2 Nand file system. Is there a way to make the device as a USB Mass Storage to a PC (Windows;which is a FAT file system). I have to read and write the device JFFS2 file system from the PC.

JFFS2 is obsolate and UBIFS is recommended for new design. UBIFS can be thought of as a JFFS2 successor with significant improvements in scalability and NAND support. If you still need JFFS2, you should switch back to Hamming HW ECC (not BCH8). See the below wiki for more details: Regards, Pavel

2010年11月16日 · JFFS2 notice: (1668) check_node_data: wrong data CRC in data node at 0x033c7f80: read 0x142a2a46, calculated 0x4. JFFS2 warning: (1668) jffs2_do_read_inode_internal: Truncating ino #6724 to 10499 bytes failed because it only h! JFFS2 warning: (1668) jffs2_do_read_inode_internal: Truncating ino #7199 to 35679 bytes failed because it only h!

JFFS2 write-buffering enabled buffer (1024) erasesize (8192) jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0xbd14 instead. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0xc43e instead. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0x58b5 instead

2015年12月15日 · Hi all, Qiang_FSL I have a Winbond nor flash on my board, W25Q256. After seeing the site: How to enable SPI NOR boot for i.MX28 (Spansion s25fl256s) I want to use the jffs2 too. But when mounting jffs2 during kernel starting, I keep seeing lots of jffs2 error, mxs-rtc mxs-rtc.0: setting system ...

Other Parts Discussed in Thread: AM1808 , OMAP-L138 Dear Forum Members, We are trying to setup u-boot and Linux for a custom board based on Sitara am1808 processor

After adding a file to a jffs2 filesystem I get message like this: "Empty flash at 0x001011e0 ends at 0x00101800" What is the problem? Are there a setting that is wrong or missed? I generated the jffs with "mkfs.jffs2 -lqnp -e 128 -r /opt/rootfs/opt -o /share/fs_opt.jffs2" I do use a Micron MT9F1G16ABC, so it is organized that way