2003年1月20日 · The CETME was originaly chambered for the 7.92 Kurz round. It was decided to rechamber it for a reduced power 308 round when 308 was adopted by NATO. Later versions used better steel and are capable of using normal 308 ammo.

2017年8月31日 · I can get a CETME parts kit cheapBut what exactly is the big differences between it and say a G3 or a PTR?I see the sights look a bit different. Internal parts don't really look that different.So what

2011年12月14日 · The Cetme is a Spanish rifle made long before the G3 and is what the G3 is based on. Cetme kits are cheaper than HK kits by up to several hundreds of dollars most of the time and some but not all of the parts are interchangeable, including magazines.

2020年6月29日 · 10 years ago I measured a Cetme recoil spring using some test equipment at work and found it to be a constant 12 pound push from start to full compression. I would guess that most rifles are using constant pressure springs too. Besides being blowback operated, one difference that HK/Cetme style rifles have with others is a really long receiver.

2015年10月19日 · The following HK 91/G3 parts are interchangeable with the older CETME rifle: Backplate or Complete recoil Assembly (minor fitting to the plastic sleeve at the end of the spring guide rod is required) Barrel Barrel Retainer Pins Blank Firing Adapter Buttstock- with minor fitting (buffer hole must be matched in order to use the cetme buffer) Carry handle and Port Buffer …

2008年11月14日 · I got a CETME this isn't one of the current Century ones. Anyway the cocking handle is very difficult to pull back. I lubed it well and it is still very stiff. I haven't had a chance to shoot it yet. And the tube looks pretty straight. When I pull the bolt assembly out the charging handle goes back and forth freely.

2009年12月22日 · Hey guys, first post to this section of ARFCOM. I have a CETME I bought that came with 3 steel CETME magazines that work perfectly. I recently bought nine aluminum G3 magazines from CTD that were brand new, though advertised used. I really have to smack the shit out of the G3 mags to get them to seat, and then I have to push the release harder than …

2016年12月18日 · Ordered a HMG flat, weldment and disconncetor, its perfect and looks amazing! should be an easy build. Sent it off to 4 bush weapons refinishing systems to get laser engraved, having all the original marking plus my trust info . Borrowed the bending jig from another builder which will help out a lot. Here is a couple pics of the flat and what images that I …

2016年12月16日 · Have a ptr91 GI. Bought cetme bayo and. Leaning kit case with lug. Will the hk bayo and plug work better?

2018年1月4日 · Firearm Discussion and Resources from AR-15, AK-47, Handguns and more! Buy, Sell, and Trade your Firearms and Gear.